HTR_E_Out_2SA_SspiDipdst - Host Transport Mode ESP Outbound 2 SA selection, Same SPI, Different IPdst
Host
HTR_E_Out_2SA_SspiDipdst.seq [-tooloption ...] -pkt HTR_E_2SA_SspiDip.def -tooloption : v6eval tool option See also HTR_E_common.def and HTR_common.def
For details of Network Topology, see 00README
Set NUT's SAD and SPD as following:
NET5 NET3 HOST1_NET5 -- Router -- NUT <----transport------ (SA1) HOST2_NET5 <----transport------ (SA2)
Security Association Database (SAD) for SA1
source address | NUT_NET3 |
destination address | HOST1_NET5 |
SPI | 0x1000 |
mode | transport |
protocol | ESP |
ESP algorithm | DES-CBC |
ESP algorithm key | 01234567 |
Security Policy Database (SPD) for SA1
source address | NUT_NET3 |
destination address | HOST1_NET5 |
upper spec | any |
direction | out |
protocol | ESP |
mode | transport |
Security Association Database (SAD) for SA2
source address | NUT_NET3 |
destination address | HOST2_NET5 |
SPI | 0x1000 |
mode | transport |
protocol | ESP |
ESP algorithm | DES-CBC |
ESP algorithm key | foo0foo1 |
Security Policy Database (SPD) for SA2
source address | NUT_NET3 |
destination address | HOST2_NET5 |
upper spec | any |
direction | out |
protocol | ESP |
mode | transport |
Tester Target | | |-------------------------->| | ICMP Echo Request | | From Host1 | | | |<--------------------------| | ICMP Echo Reply | | To Host1 | | (using SA1) | | | | | |-------------------------->| | ICMP Echo Request | | From Host2 | | | |<--------------------------| | ICMP Echo Reply | | To Host2 | | (using SA2) | | | v v
ICMP Echo Request from Host1
IP Header | Source Address | HOST1_NET5 |
Destination Address | NUT_NET3 | |
ICMP | Type | 128 (Echo Request) |
ICMP Echo Reply using SA1 to Host1
IP Header | Source Address | NUT_NET3 |
Destination Address | HOST1_NET5 | |
ESP | SPI | 0x1000 |
Algorithm | DES-CBC | |
Key | 01234567 | |
ICMP | Type | 129 (Echo Reply) |
ICMP Echo Request from Host2
IP Header | Source Address | HOST2_NET5 |
Destination Address | NUT_NET3 | |
ICMP | Type | 128 (Echo Request) |
ICMP Echo Reply using SA2 to Host2
IP Header | Source Address | NUT_NET3 |
Destination Address | HOST2_NET5 | |
ESP | SPI | 0x1000 |
Algorithm | DES-CBC | |
Key | foo0foo1 | |
ICMP | Type | 129 (Echo Reply) |
PASS: Both ICMP Echo Reply with ESP (using SA1, SA2) received
perldoc V6evalTool
IPSEC.html IPsec Test Common Utility