NAME

  PL_OddOverRouter - check IPv6 Header Payload Length is Odd (over router)


TARGET

  Router


SYNOPSIS

  PL_OddOverRouter.seq [-tooloption ...] -pkt PL_OddOverRouter.def
    -tooloption : v6eval tool option


INITIALIZATION

  None


TEST PROCEDURE

  Tester                      Target                      Tester
              (Link0)                     (Link1)
    |                           |                           |
    |-------------------------->|                           |
    |   Echo Request to Link0   |                           |
    |                           |                           |
    |                           |-------------------------->|
    |                           |   Neighbor Solicitation   |
    |                           |                           |
    |                           |<--------------------------|
    |                           |   Neighbor Advertisement  |
    |                           |                           |
    |                           |-------------------------->|
    |                           |   Echo Request from Link1 |
    |                           |                           |
    |                           |                           |
    |                           |<--------------------------|
    |                           |   Echo Reply to Link1     |
    |                           |                           |
    |<--------------------------|                           |
    |   Neighbor Solicitation   |                           |
    |                           |                           |
    |-------------------------->|                           |
    |   Neighbor Advertisement  |                           |
    |                           |                           |
    |<--------------------------|                           |
    |   Echo Reply from Link0   |                           |
    |                           |                           |
    v                           v                           v

  1. Send Echo Request to Link0
  2. Wait Echo Request from Link1 or NS from Link1
  3. If NS received then send NA to Link1, and wait Echo Request form Link1 again
  4. Receive Echo Request from Link1
  5. Send Echo Reply to Link1
  6. Wait Echo Reply from Link0 or NS from Link0
  7. If NS received then send NA to Link0, and wait Echo Reply form Link0 again
  8. Receive Echo Reply from Link0

  Echo Request to Link0 Data is:

        IPv6 Header
            Version            = 6
            Traffic Class      = 0
            FlowLabel          = 0
            PayloadLength      = 15
            NextHeader         = 58 (ICMP)
            SourceAddress      = Tester Global Address (Link0)
            DestinationAddress = Tester Global Address (Link1)

        ICMP Echo Request
            Type           = 128 (Echo Request)
            Code           = 0
            Checksum       = (auto)
            Identifier     = 0xffff
            SequenceNumber = 1
            PayloadData    = {1,2,3,4,5,6,7}

  Neighbor Solicitation packet's IP source Address selection may be:
    - Link Local Address
    - Global Address
  This test IS NOT the Neighbor Discovery test, so admit both implementation.


JUDGEMENT

  PASS: Echo Reply Received from Link0

        IPv6 Header
            Version             = 6
            Traffic Class       = 0
            FlowLabel           = 0
            PayloadLength       = 15
            NextHeader          = 58 (ICMP)
            SourceAddress      = Tester Global Address (Link1)
            DestinationAddress = Tester Global Address (Link0)

        ICMP Echo Reply
            Type           = 129 (Echo Reply)
            Code           = 0
            Checksum       = (auto)
            Identifier     = 0xffff (same as Echo Request)
            SequenceNumber = 1 (same as Echo Request)
            PayloadData    = {1,2,3,4,5,6,7} (same as Echo Request)


SEE ALSO

  perldoc V6evalTool